Home Profile Products Quality Policy Certificate Contact Enquiry
 

Siemens VFD MM 420 Ac Drive

Siemens VFD MM 420 Ac Drive

   

A SIEMENS SIEMENS MICROMASTER (MM)420 frequency inverter, which can be adapted to every individual provisions without any great effort. MICROMASTER 420, the comprehensive inverter for 3-phase networks and voluntary field-bus connection from Siemens is designed for flexibility. Thanks to its modular design, the wide standard functions can be supplemented with a wide variety of options. No need for tools, as the operator panels and the communications modules can be simply plugged in. And Screw less control terminals - as with the rest of the family - make terminal connection anybody’s job

NOTICEABLE POINT

• MM420 VFD is Compact size
• MM 420 AC DRIVE Easy to commission
• Very flexible inputs and outputs
• MM420 FCC control (Flux Current Control) for high drive quality, even when load changes occur

• Dissimilar methods of commissioning, via operator panel or cost-free software tool
• Compound braking for controlled rapid braking
• 4 skip frequencies for minimizing stress on the machine when resonance occur
• Automatic restart
• Minimal stress on motor when inverter connected to rotating motor
• Modular system of inverter options
• Parameterizable acceleration/ deceleration times (0 to 650 s)
 • Prepared for use in IT networks
 • Integrated protection/overload functions
 • Available with or without integrated EMC filter

Technical data

SIEMENS MICROMASTER 420 SPECIFICATION

Mains voltage and power ranges

 

 

200 V to 240 V 1 AC ±10 %

0.12 kW to 3 kW

200 V to 240 V 3 AC ±10 %

0.12 kW to 5.5 kW

380 V to 480 V 3 AC ±10 %

0.37 kW to 11 kW

Power frequency

47 Hz to 63 Hz

Output frequency

0 Hz to 650 Hz (Due to legal restrictions a limitation to 550 Hz is under preparation)

Power factor

≥ 0.95

Inverter efficiency

96 % to 97 % (Further information is available on the Internet at:


Overload capability

Overload current 1.5 x rated output current (i.e. 150 % overload capability) for 60 s, cycle time 300 s

Inrush current

Less than rated input current

Control method

Linear V/f characteristic; quadratic V/f characteristic; multipoint characteristic (programmable V/f characteristic); flux current control (FCC)

Pulse frequency

16 kHz (standard with 230 V 1/3 AC) 
4 kHz (standard with 400 V 3 AC)
2 kHz to 16 kHz (in 2 kHz steps)

Fixed frequencies

7, programmable

Skip frequency ranges

4, programmable

Setpoint resolution

0.01 Hz digital
0.01 Hz serial
10 bit analog

Digital inputs

3 fully programmable isolated digital inputs; switchable PNP/NPN

Analog input

1, for setpoint or PI controller (0 V to 10 V, scaleable or for use as 4th digital input)

Relay outputs

1, programmable, 30 V DC/5 A (resistive load); 250 V AC/2 A (inductive load)

Analog output

1, programmable, 30 V DC/5 A (resistive load); 250 V AC/2 A (inductive load)

Serial interfaces

RS-485, optional RS-232

Motor cable lengths

 

without output choke

max. 50 m (shielded)
max. 100 m (unshielded)

with output choke

see variant dependent options

Electromagnetic compatibility

Inverter available with internal EMC filter Class A; available as options are EMC filters to EN 55 011, Class A or Class B

Braking

DC braking, compound braking

Degree of protection

IP20

Operating temperature

–10 °C to +50 °C (+14 °F to +122 °F)

Storage temperature

–40 °C to +70 °C (–40 °F to +158 °F)

Relative humidity

95 % (non-condensing)

Installation altitude

Up to 1000 m above sea level without derating

Installation altitude

Up to 1000 m above sea level without derating

Standard SCCR
(Short Circuit Current Rating) 1)

10 kA

Protection features for

Undervoltage

 

Overvoltage

 

Overload

 

Earth faults

 

Short circuit

 

Stall prevention

 

Locked motor protection

 

Motor overtemperature

 

Inverter overtemperature

 

Parameter interlock

Compliance with standards

UL, cUL, CE, c-tick

CE marking

Conformity with low-voltage directive 73/23/EEC

Cooling-air volumetric flow required, dimensions and weights
(without options)

Frame size (FS)

Cooling-air volumetric flow required (l/s)/(CFM)

H x W x D (mm) Weight, approx. (kg)
  A

4.8/10.2

173 x 73 x 149

1.0

 

B

24/51

202 x 149 x 172

3.3

 

C

54.9/116.3

245 x 185 x 195
5.0
    CFM:
Cubic Feet per Minute    
FOLLOWING ARE MM440 VFD PRODUCT DETAILS

MLFB

PRODUCT DETAILS

6SE64202AB112AA1

SIEMENS MICROMASTER (MM)420 WITH BUILT IN CLASS A FILTER 1AC 200-240V +10/-10% 47-63HZ CONSTANT TORQUE POWER 0.12 KW OVERLOAD 150% FOR 60S VARIABLE TORQUE POWER 0.12 KW 173 X 73 X 149 (H X W X D) PROTECTION IP20 AMBIENT TEMP -10 TO +50 DEG C W/O AOP/BOP

6SE64202AB125AA1

SIEMENS MICROMASTER (MM)420 WITH BUILT IN CLASS A FILTER 1AC 200-240V +10/-10% 47-63HZ CONSTANT TORQUE POWER 0.25 KW OVERLOAD 150% FOR 60S VARIABLE TORQUE POWER 0.25 KW 173 X 73 X 149 (H X W X D) PROTECTION IP20 AMBIENT TEMP -10 TO +50 DEG C W/O AOP/BOP

6SE64202AB137AA1

SIEMENS MICROMASTER (MM)420 WITH BUILT IN CLASS A FILTER 1AC 200-240V +10/-10% 47-63HZ CONSTANT TORQUE POWER 0.37 KW OVERLOAD 150% FOR 60S VARIABLE TORQUE POWER 0.37 KW 173 X 73 X 149 (H X W X D) PROTECTION IP20 AMBIENT TEMP -10 TO +50 DEG C W/O AOP/BOP

6SE64202AB155AA1

SIEMENS MICROMASTER (MM)420 WITH BUILT IN CLASS A FILTER 1AC 200-240V +10/-10% 47-63HZ CONSTANT TORQUE POWER 0.55 KW OVERLOAD 150% FOR 60S VARIABLE TORQUE POWER 0.55 KW 173 X 73 X 149 (H X W X D) PROTECTION IP20 AMBIENT TEMP -10 TO +50 DEG C W/O AOP/BOP

6SE64202AB175AA1

SIEMENS MICROMASTER (MM)420 WITH BUILT IN CLASS A FILTER 1AC 200-240V +10/-10% 47-63HZ CONSTANT TORQUE POWER 0.75 KW OVERLOAD 150% FOR 60S VARIABLE TORQUE POWER 0.75 KW 173 X 73 X 149 (H X W X D) PROTECTION IP20 AMBIENT TEMP -10 TO +50 DEG C W/O AOP/BOP

6SE64202AB211BA1

SIEMENS MICROMASTER (MM)420 WITH BUILT IN CLASS A FILTER 1AC 200-240V +10/-10% 47-63HZ CONSTANT TORQUE POWER 1.1 KW OVERLOAD 150% FOR 60S VARIABLE TORQUE POWER 1.1 KW 202 X 149 X 172 (H X W X D) PROTECTION IP20 AMBIENT TEMP -10 TO +50 DEG C W/O AOP/BOP

6SE64202AB215BA1

SIEMENS MICROMASTER (MM)420 WITH BUILT IN CLASS A FILTER 1AC 200-240V +10/-10% 47-63HZ CONSTANT TORQUE POWER 1.5 KW OVERLOAD 150% FOR 60S VARIABLE TORQUE POWER 1.5 KW 202 X 149 X 172 (H X W X D) PROTECTION IP20 AMBIENT TEMP -10 TO +50 DEG C W/O AOP/BOP

6SE64202AB222BA1

SIEMENS MICROMASTER (MM)420 WITH BUILT IN CLASS A FILTER 1AC 200-240V +10/-10% 47-63HZ CONSTANT TORQUE POWER 2.2 KW OVERLOAD 150% FOR 60S VARIABLE TORQUE POWER 2.2 KW 202 X 149 X 172 (H X W X D) PROTECTION IP20 AMBIENT TEMP -10 TO +50 DEG C W/O AOP/BOP

6SE64202AB230CA1

SIEMENS MICROMASTER (MM)420 WITH BUILT IN CLASS A FILTER 1AC 200-240V +10/-10% 47-63HZ CONSTANT TORQUE POWER 3 KW OVERLOAD 150% FOR 60S VARIABLE TORQUE POWER 3 KW 245 X 185 X 195 (H X W X D) PROTECTION IP20 AMBIENT TEMP -10 TO +50 DEG C W/O AOP/BOP

6SE64202AC230CA1

SIEMENS MICROMASTER (MM)420 WITH BUILT IN CLASS A FILTER 3AC 200-240V +10/-10% 47-63HZ CONSTANT TORQUE POWER 3 KW OVERLOAD 150% FOR 60S VARIABLE TORQUE POWER 3 KW 245 X 185 X 195 (H X W X D) PROTECTION IP20 AMBIENT TEMP -10 TO +50 DEG C W/O AOP/BOP

6SE64202AC240CA1

SIEMENS MICROMASTER (MM)420 WITH BUILT IN CLASS A FILTER 3AC 200-240V +10/-10% 47-63HZ CONSTANT TORQUE POWER 4 KW OVERLOAD 150% FOR 60S VARIABLE TORQUE POWER 4 KW 245 X 185 X 195 (H X W X D) PROTECTION IP20 AMBIENT TEMP -10 TO +50 DEG C W/O AOP/BOP

6SE64202AC255CA1

SIEMENS MICROMASTER (MM)420 WITH BUILT IN CLASS A FILTER 3AC 200-240V +10/-10% 47-63HZ CONSTANT TORQUE POWER 5.5 KW OVERLOAD 150% FOR 60S VARIABLE TORQUE POWER 5.5 KW 245 X 185 X 195 (H X W X D) PROTECTION IP20 AMBIENT TEMP -10 TO +50 DEG C W/O AOP/BOP

6SE64202AD222BA1

SIEMENS MICROMASTER (MM)420 WITH BUILT IN CLASS A FILTER 3AC 380-480V +10/-10% 47-63HZ CONSTANT TORQUE POWER 2.2 KW OVERLOAD 150% FOR 60S VARIABLE TORQUE POWER 2.2 KW 202 X 149 X 172 (H X W X D) PROTECTION IP20 AMBIENT TEMP -10 TO +50 DEG C W/O AOP/BOP

6SE64202AD230BA1

SIEMENS MICROMASTER (MM)420 WITH BUILT IN CLASS A FILTER 3AC 380-480V +10/-10% 47-63HZ CONSTANT TORQUE POWER 3 KW OVERLOAD 150% FOR 60S VARIABLE TORQUE POWER 3 KW 202 X 149 X 172 (H X W X D) PROTECTION IP20 AMBIENT TEMP -10 TO +50 DEG C W/O AOP/BOP

6SE64202AD240BA1

SIEMENS MICROMASTER (MM)420 WITH BUILT IN CLASS A FILTER 3AC 380-480V +10/-10% 47-63HZ CONSTANT TORQUE POWER 4 KW OVERLOAD 150% FOR 60S VARIABLE TORQUE POWER 4 KW 202 X 149 X 172 (H X W X D) PROTECTION IP20 AMBIENT TEMP -10 TO +50 DEG C W/O AOP/BOP

6SE64202AD255CA1

SIEMENS MICROMASTER (MM)420 WITH BUILT IN CLASS A FILTER 3AC 380-480V +10/-10% 47-63HZ CONSTANT TORQUE POWER 5.5 KW OVERLOAD 150% FOR 60S VARIABLE TORQUE POWER 5.5 KW 245 X 185 X 195 (H X W X D) PROTECTION IP20 AMBIENT TEMP -10 TO +50 DEG C W/O AOP/BOP

6SE64202AD275CA1

SIEMENS MICROMASTER (MM)420 WITH BUILT IN CLASS A FILTER 3AC 380-480V +10/-10% 47-63HZ CONSTANT TORQUE POWER 7.5 KW OVERLOAD 150% FOR 60S VARIABLE TORQUE POWER 7.5 KW 245 X 185 X 195 (H X W X D) PROTECTION IP20 AMBIENT TEMP -10 TO +50 DEG C W/O AOP/BOP

6SE64202AD311CA1

SIEMENS MICROMASTER (MM)420 WITH BUILT IN CLASS A FILTER 3AC 380-480V +10/-10% 47-63HZ CONSTANT TORQUE POWER 11 KW OVERLOAD 150% FOR 60S VARIABLE TORQUE POWER 11 KW 245 X 185 X 195 (H X W X D) PROTECTION IP20 AMBIENT TEMP -10 TO +50 DEG C W/O AOP/BOP

6SE64202UC112AA1

SIEMENS MICROMASTER (MM)420 UNFILTERED 1/3AC 200-240V +10/-10% 47-63HZ CONSTANT TORQUE POWER 0.12 KW OVERLOAD 150% FOR 60S VARIABLE TORQUE POWER 0.12 KW 173 X 73 X 149 (H X W X D) PROTECTION IP20 AMBIENT TEMP -10 TO +50 DEG C W/O AOP/BOP

6SE64202UC125AA1

SIEMENS MICROMASTER (MM)420 UNFILTERED 1/3AC 200-240V +10/-10% 47-63HZ CONSTANT TORQUE POWER 0.25 KW OVERLOAD 150% FOR 60S VARIABLE TORQUE POWER 0.25 KW 173 X 73 X 149 (H X W X D) PROTECTION IP20 AMBIENT TEMP -10 TO +50 DEG C W/O AOP/BOP

6SE64202UC137AA1

SIEMENS MICROMASTER (MM)420 UNFILTERED 1/3AC 200-240V +10/-10% 47-63HZ CONSTANT TORQUE POWER 0.37 KW OVERLOAD 150% FOR 60S VARIABLE TORQUE POWER 0.37 KW 173 X 73 X 149 (H X W X D) PROTECTION IP20 AMBIENT TEMP -10 TO +50 DEG C W/O AOP/BOP

6SE64202UC155AA1

SIEMENS MICROMASTER (MM)420 UNFILTERED 1/3AC 200-240V +10/-10% 47-63HZ CONSTANT TORQUE POWER 0.55 KW OVERLOAD 150% FOR 60S VARIABLE TORQUE POWER 0.55 KW 173 X 73 X 149 (H X W X D) PROTECTION IP20 AMBIENT TEMP -10 TO +50 DEG C W/O AOP/BOP

6SE64202UC175AA1

SIEMENS MICROMASTER (MM)420 UNFILTERED 1/3AC 200-240V +10/-10% 47-63HZ CONSTANT TORQUE POWER 0.75 KW OVERLOAD 150% FOR 60S VARIABLE TORQUE POWER 0.75 KW 173 X 73 X 149 (H X W X D) PROTECTION IP20 AMBIENT TEMP -10 TO +50 DEG C W/O AOP/BOP

6SE64202UC211BA1

SIEMENS MICROMASTER (MM)420 UNFILTERED 1/3AC 200-240V +10/-10% 47-63HZ CONSTANT TORQUE POWER 1.1 KW OVERLOAD 150% FOR 60S VARIABLE TORQUE POWER 1.1 KW 202 X 149 X 172 (H X W X D) PROTECTION IP20 AMBIENT TEMP -10 TO +50 DEG C W/O AOP/BOP

6SE64202UC215BA1

SIEMENS MICROMASTER (MM)420 UNFILTERED 1/3AC 200-240V +10/-10% 47-63HZ CONSTANT TORQUE POWER 1.5 KW OVERLOAD 150% FOR 60S VARIABLE TORQUE POWER 1.5 KW 202 X 149 X 172 (H X W X D) PROTECTION IP20 AMBIENT TEMP.-10 TO +50 DEG C W/O AOP/BOP

6SE64202UC222BA1

SIEMENS MICROMASTER (MM)420 UNFILTERED 1/3AC 200-240V +10/-10% 47-63HZ CONSTANT TORQUE POWER 2.2 KW OVERLOAD 150% FOR 60S VARIABLE TORQUE POWER 2.2 KW 202 X 149 X 172 (H X W X D) PROTECTION IP20 AMBIENT TEMP -10 TO +50 DEG C W/O AOP/BOP

6SE64202UC230CA1

SIEMENS MICROMASTER (MM)420 UNFILTERED 1/3AC 200-240V +10/-10% 47-63HZ CONSTANT TORQUE POWER 3 KW OVERLOAD 150% FOR 60S VARIABLE TORQUE POWER 3 KW 245 X 185 X 195 (H X W X D) PROTECTION IP20 AMBIENT TEMP -10 TO +50 DEG C W/O AOP/BOP

6SE64202UC240CA1

SIEMENS MICROMASTER (MM)420 UNFILTERED 3AC 200-240V +10/-10% 47-63HZ CONSTANT TORQUE POWER 4 KW OVERLOAD 150% FOR 60S VARIABLE TORQUE POWER 4 KW 245 X 185 X 195 (H X W X D) PROTECTION IP20 AMBIENT TEMP -10 TO +50 DEG C W/O AOP/BOP

6SE64202UC255CA1

SIEMENS MICROMASTER (MM)420 UNFILTERED 3AC 200-240V +10/-10% 47-63HZ CONSTANT TORQUE POWER 5.5 KW OVERLOAD 150% FOR 60S VARIABLE TORQUE POWER 5.5 KW 245 X 185 X 195 (H X W X D) PROTECTION IP20 AMBIENT TEMP -10 TO +50 DEG C W/O AOP/BOP

6SE64202UD137AA1

SIEMENS MICROMASTER (MM)420 UNFILTERED 3AC 380-480V +10/-10% 47-63HZ CONSTANT TORQUE POWER 0.37 KW OVERLOAD 150% FOR 60S VARIABLE TORQUE POWER 0.37 KW 173 X 73 X 149 (H X W X D) PROTECTION IP20 AMBIENT TEMP -10 TO +50 DEG C W/O AOP/BOP

6SE64202UD155AA1

SIEMENS MICROMASTER (MM)420 UNFILTERED 3AC 380-480V +10/-10% 47-63HZ CONSTANT TORQUE POWER 0.55 KW OVERLOAD 150% FOR 60S VARIABLE TORQUE POWER 0.55 KW 173 X 73 X 149 (H X W X D) PROTECTION IP20 AMBIENT TEMP -10 TO +50 DEG C W/O AOP/BOP

6SE64202UD175AA1

SIEMENS MICROMASTER (MM)420 UNFILTERED 3AC 380-480V +10/-10% 47-63HZ CONSTANT TORQUE POWER 0.75 KW OVERLOAD 150% FOR 60S VARIABLE TORQUE POWER 0.75 KW 173 X 73 X 149 (H X W X D) PROTECTION IP20 AMBIENT TEMP -10 TO +50 DEG C W/O AOP/BOP

6SE64202UD211AA1

SIEMENS MICROMASTER (MM)420 UNFILTERED 3AC 380-480V +10/-10% 47-63HZ CONSTANT TORQUE POWER 1.1 KW OVERLOAD 150% FOR 60S VARIABLE TORQUE POWER 1.1 KW 173 X 73 X 149 (H X W X D) PROTECTION IP20 AMBIENT TEMP -10 TO +50 DEG C W/O AOP/BOP

6SE64202UD215AA1

SIEMENS MICROMASTER (MM)420 UNFILTERED 3AC 380-480V +10/-10% 47-63HZ CONSTANT TORQUE POWER 1.5 KW OVERLOAD 150% FOR 60S VARIABLE TORQUE POWER 1.5 KW 173 X 73 X 149 (H X W X D) PROTECTION IP20 AMBIENT TEMP -10 TO +50 DEG C W/O AOP/BOP

6SE64202UD222BA1

SIEMENS MICROMASTER (MM)420 UNFILTERED 3AC 380-480V +10/-10% 47-63HZ CONSTANT TORQUE POWER 2.2 KW OVERLOAD 150% FOR 60S VARIABLE TORQUE POWER 2.2 KW 202 X 149 X 172 (H X W X D) PROTECTION IP20 AMBIENT TEMP -10 TO +50 DEG C W/O AOP/BOP

6SE64202UD230BA1

SIEMENS MICROMASTER (MM)420 UNFILTERED 3AC 380-480V +10/-10% 47-63HZ CONSTANT TORQUE POWER 3 KW OVERLOAD 150% FOR 60S VARIABLE TORQUE POWER 3 KW 202 X 149 X 172 (H X W X D) PROTECTION IP20 AMBIENT TEMP -10 TO +50 DEG C W/O AOP/BOP

6SE64202UD240BA1

SIEMENS MICROMASTER (MM)420 UNFILTERED 3AC 380-480V +10/-10% 47-63HZ CONSTANT TORQUE POWER 4 KW OVERLOAD 150% FOR 60S VARIABLE TORQUE POWER 4 KW 202 X 149 X 172 (H X W X D) PROTECTION IP20 AMBIENT TEMP -10 TO +50 DEG C W/O AOP/BOP

6SE64202UD255CA1

SIEMENS MICROMASTER (MM)420 UNFILTERED 3AC 380-480V +10/-10% 47-63HZ CONSTANT TORQUE POWER 5.5 KW OVERLOAD 150% FOR 60S VARIABLE TORQUE POWER 5.5 KW 245 X 185 X 195 (H X W X D) PROTECTION IP20 AMBIENT TEMP -10 TO +50 DEG C W/O AOP/BOP

6SE64202UD275CA1

SIEMENS MICROMASTER (MM)420 UNFILTERED 3AC 380-480V +10/-10% 47-63HZ CONSTANT TORQUE POWER 7.5 KW OVERLOAD 150% FOR 60S VARIABLE TORQUE POWER 7.5 KW 245 X 185 X 195 (H X W X D) PROTECTION IP20 AMBIENT TEMP -10 TO +50 DEG C W/O AOP/BOP

6SE64202UD311CA1

SIEMENS MICROMASTER (MM)420 UNFILTERED 3AC 380-480V +10/-10% 47-63HZ CONSTANT TORQUE POWER 11 KW OVERLOAD 150% FOR 60S VARIABLE TORQUE POWER 11 KW 245 X 185 X 195 (H X W X D) PROTECTION IP20 AMBIENT TEMP -10 TO +50 DEG C W/O AOP/BOP

6AG14202UD137AA1

SIPLUS MM420 FS A 0.37KW FOR MEDIAL STRESS BASED ON 6SE6420-2UD13-7AA1

6AG14202UD175AA1

SIPLUS MM420 FS A 0.75KW FOR MEDIAL STRESS BASED ON 6SE6420-2UD17-5AA1

6AG14202UD230BA1

SIPLUS MM420 FS B 3KW FOR MEDIAL STRESS BASED ON 6SE6420-2UD23-0BA1

6AG14202UD240BA1

SIPLUS MM420 FS B 4KW FOR MEDIAL STRESS BASED ON 6SE6420-2UD24-0BA1

6AG14202UD311CA1

SIPLUS MM420 FS C 11KW FOR MEDIAL STRESS BASED ON 6SE6420-2UD31-1CA1

CONTACT US FOR PRICE OF SIEMENS MICROMASTER 420 VFD ( AC DRIVE )

M/s Grups Automation, Being Genuine supplier, dealer and Distributer OF MM420 AC DRIVE all over India, We provide all type of supports and services in following cities and industrial

• Mumbai, Maharashtra
• Pune, Maharashtra
• Ahmadabad ,Gujarat
• Vapi
• Surat
• Vadodara
• Chennai
• Vishakhapatnam
• Kollam
• Hubli
• Coimbatore
• Delhi / New Delhi
• Chhotanagpur
• Kolkata
• Ahmedabad
• Bengaluru
• Bhopal
• Bhubaneswar
• Chandigarh
• Coimbatore
• Gurgaon
• Hyderabad
• Jaipur
• Jamshedpur
• Kharghar
• Kolkata
• Lucknow
• Kochi
• Nagpur
• Navi Mumbai
• New Delhi
• Puducherry
• Visakhapatnam
M/s Grups Automation also export Automation panels by using SIEMENS PLC, HMI and VFD . We have successfully completed installations and we can give excellent support in

• Abu Dhabi
• Accra, Ghana
• Addis Ababa,
• Alexandria,
• Algiers,
• Antananarivo, Mautitius
• Almaty In Kazakhstan
• Astana,
• Bahrain
• Bishtek, Kyrgyzstan
• Brazil
• Brazzavilla, Congo
• Casablanca,
• Conakry, Guinea
• Cape Town, South Africa
• Dakar, Senegal
• Dar Es Salaam,
• Dhaka, Bangladesh
• Douala
• Doha,
• Dubai,
• Dushanbe, Tajikistan
• Giza
• Harare, Zimbabwe
• Hargeisa,
• Istambul
• Jakarta, Indonesia
• Jeddah,
• Jerusalem
• Kano,
• Kampala, Uganda
• Khartoum-Omdurman,
• Kigali
• Kuwait
• Lagos, Nigeria
• Lome, Togo
• Abuja, Nigeria
• Luanda, Angola
• Lilongwe, Malawi
• Libreville, Gabon
• Manila
• Mecca,
• Medina
• Mogadishu,
• Nairobi, Kenya
• Nigeria
• Oman
• Pretoria, Swaziland
• Qatar
• Rangoon, Myanmar
• Salalah In Oman
• Saudi Arabia
• Sanaa
• Muscat
• Seeb
• Syria
• Tashkent, Uzbekistan
• Tripoli,
• UAE,



Simens VFD V 90 Simens VFD S 120

Siemens Vfd :Simens VFD Sinamic G 110 (Ac Drive) | Simens VFD Sinamic G 120 (Ac Drive) | Simens Sinamic G 120 c VFD (Ac Drive) | Siemens Vfd Sinamic G130 (Ac Drive) | Siemens VFD MM 420 Ac Drive | Siemens VFD MM430 Ac Drive | Siemens MM440 VFD ( Ac Drive ) | Siemens Vfd Sinamics V20 (Ac Drive) | Siemens S7 200 SMART

Siemens Vfd Panel | siemense PLC & HMI | Siemens PLC Panel | SIEMENS Win CC SCADA | Automation ( VFD & PLC Panels ) |

SIEMENS VFD SINAMIC G110 | SIEMENS VFD SINAMIC G120 | SIEMENS VFD SINAMIC G120C | SIEMENS VFD SINAMIC G130 | SIEMENS VFD SINAMIC V20 | SIEMENS VFD MM 420 | SIEMENS VFD MM 430 | SIEMENS VFD MM 440 | SIEMENS S7 200 | SIEMENS S7 200 SMART | SIEMENS S7 1200 | SIEMENS S7 300 | SIEMENS S7 400 | SIEMENS S7 1500 | SIEMENS ET200S | SIEMENS KTP 400 HMI| SIEMENS KTP 600 BASIC COLOUR HMI | SIEMENS KTP 600 BASIC MONO HMI | SIEMENS KTP 1000 BASIC COLOUR HMI | SIEMENS KTP 1500 BASIC COLOUR HMI | SIEMENS KTP 400 BASIC 2ND GEN | SIEMENS KTP 700 BASIC 2ND GEN | SIEMENS KTP 900 BASIC 2ND GEN | SIEMENS KTP 1200 BASIC 2ND GEN | SIEMENS KP 400 COMFORT | SIEMENS KP 700 COMFORT | SIEMENS KP 1200 COMFORT | SIEMENS KP 1500 COMFORT | SIEMENS TP 1900 COMFORT | SIEMENS TP 2200 COMFORT |
 
 
Home | Profile | Products | Quality Policy | Contact Us | Enquiry |

 

Designed & Hosted by : MID |  Promoted by : GID